It's Me!

Well, another month has gone by and a lot has happened. I managed to fracture a rib. Don't let anyone tell you it doesn't hurt bad. It does. And it affects your sleep too. You'd be supprised how much you move around at night. Imagine someone poking you in the ribs 2-3 times a night... Not fun. And I started a new job. There always seems like there is so much to do...

I have been flying my tricopter just about every weekend. I am getting more comfortable with it. But I am far from being anything but a novice. I am  proud to say I have flown through several batteries on one outing and haven't had a crash in my last 4 outings.

I am still working on the quads, yes plura. I have a 250 class quad and a 230 class quad. The 230 is small. I had taken the 250 up and landed really hard, but it was minor stuff. Propellers cracked, nothing too serious. But I could not get it to arm afterward. It kept thinking that the throttle wasn't a zero on power up.  I had another Q Brain (4 ESCs in one small package) already on order an coming, so I tried it and it did the same thing. The only other thing it could be is the flight controller. I have already ordered 4 individual ESCs and I may just go ahead and order another flight controller, they cost much.

This is great. two months in a row of making a blog post! Now if I could just get a project a month, I be really on track! When I get my ESCs in, I will do a write up on the 230 class quad. Should be fun.



Wow! Doesn't time fly... But more about that later. As most of you know, my latest obsession (as if I need another one) has been RC stuff... foamy planes mainly, that is until I got turned on to the multicopters! I must say that I have had better luck with them than airplains! I am working on a project page outlining my basic equipment (TX and RX) and what I like about them. I am going to do some more writes ups about my tricopter and my quad (a work in progress). I have a basic write up about the current Maker Hanger 2 series.

I did have a set back a week ago when I broke a rib. Painful, yes, but isn't stopping me. I just have to move a bit slower and a bit more carefully! As my flying skills improve, I will get some video as well...

Standby for more. The project page is in the works!

Edit: I did manage to get my RaspberryPi up as a webserver. It can even support CMS Made Simple! I had almost forgotten about it. I copied one of my websites (downloaded the database, and images/files and installed CMS Made Simple). It is running on my internal network.  If you are interested on how it did it , drop me a line.



I almost feel ashamed... almost... I was going to *try* and post something once a month. Well, needless to say, that did not happen. I managed to get the major move in the house done. I am still settling in, finding things, figuring out where to put things.

I have completed  a few little projects, but, alas, I have not documented anything. Among the projects was a 3d cube from RadioShack that I managed to pick up for about 5 dollars on clearance. Let me just add here that you should check out your local RadioShack for clearance deals.I picked up a Panavise Electronics Work Center  for $20! I have picked up microcontroller kits for under $10.

I also put together a grbl board (info here) with stepstick drivers (info here). I got both items off of eBay. All needed some assembly.

I also started looking for a replacement for my old Weller Soldering Iron. It has been very reliable, but lately it has been taking quite a while to heat up and maintain heat. I managed to score a Tenma 2-in-1 Rework Station. It is an awsome upgrade and if you happen to catch it on sale.

I will be working a an article about my RC equipment. It will cover my basic equipment and my current favorite flyer. In case you haven't heard, I got hooked on this through the Maker Hanger. It walks you through the entire process including building your trainer. The good news is that Maker Hanger 2 is almost here. The focus on this one is more on where you can get the parts from US suppliers. Quite a bit of the original Maker Hanger equipment came from HobbyKing International (China). To be fair, alot of the items could be ordered from the US distributer, and more items are becoming available. However, the transmitter radio and recievers could only come from China. However, the series was great in that it walked you through everything you needed to get started. I can't wait for Maker Hanger 2!

More to come,



Well it's February already and no new project posts. In my defense, I have a lot going on. The main item on my plate is a home renovation project. It will be great when it is over. Essentially, moving a couple of rooms around. The upstairs guest room will now be my lab/workroom. The sewing room is being moved in to the office. All of the worktables need to be removed from the walls and the rolling cutting table needed to be cut down a bit. Needless to say, there is a lot of purging and consolidating to do. I got the guest room downstairs, my stuff upstairs and just about set up like I want it. Still a bit to go. The office still needs a fair bit of work too.

I do have a few projects in the queue including some RC stuff. But I realized that I haven't been happy with the project format. It was cumbersome to post new projects and it took way to long to just post one small project. The new format will work more like a blog with a photo gallery. I am still working on the layout. When done, I will be able to post project much faster and they will have a more standard layout.

I am still going to post at least once a month. Hopefully, projects not just updates...



<< < Page 3 of 18 > >>

Disclaimer: This site contains projects that may hurt you. Soldering irons get hot. Knives are sharp. Wear safety glasses and act accordingly. Do not run with scissors. Electricity can kill. Do not drink and drive. Operating a soldering iron under the influence will probably get you burned or worse. If you are not an adult, get adult supervision. If you hurt yourself or break something, don't blame me. Enjoy your stay and drop me a line if you want to leave a comment...