Electronics. Robotics. Computers. DIY. Arduino. Raspberry Pi. RC. 3D Printing.

Whatever catches my fancy at the moment.

Home

Page 1 of 5  >  >>

Aug 19, 2017
Posted by: Keith

I am getting really frustrated with my talking skull. I had bits of it working, then it quit working... I am thinking it is a combination of things. I think the Arduino I was using, overheated for some reason and the install of the Arduino IDE software has something wrong with it. I was able to get it to compile with the web version of the software, so I am pretty sure that is it. I had to order a couple of more bits for the mp3 player part. Once I get those in, I will pick it up again. It shouldn't take too long to get it all put together from there.

I also started painting minis again (First Paints)... Well, some not so mini I just finished one that is 135mm tall (Hannibal the monster), not the standard 25mm. I am 3d printing some and found a couple of mini boxed sets (two old Grenadier Dragon Lords sets!) that I hadn't painted yet. So, it is the start of a painting adventure using new paints (acrylics) and trying different things in basing and finishing that I haven't done before. At some point, I may reprint Hannibal at a higher resolution and do a better job painting. He has a lot of flesh tones showing and as I said before, I am really just learning how to use this new (to me) medium.

You will find them on the new Painting Projects page. I have also uploaded closeups (some are not too pretty!) to the gallery.

 

TTFN,

Keith

Aug 10, 2017
Posted by: Keith

K2SO is done. Check out the project page. I finished it a few weeks ago, but I just got the pictures done. I am pretty sure I could have done it better. However, as in all things, hind sight is 20/20. I am learning how to paint again. I used to paint with enamels, but I am now using acrylics. Uses a totally different technique. The pictures are up in the K2SO gallery has been updated as well.

I have also been printing out some miniatures to paint. Check out the Lovecraftian 3d Prints - there are lots more pictures in the gallery. In case you don't know, I am a big H.P. Lovecraft fan. I love the Call of Cthulhu RPG published by Chaosium. So, I printed a few things and painted them up. Keep in mind most of the pictures are extreme closeups. You can even see the 3d printer layer lines. But like I said, I am learning again. Printing small has it's own set of challenges as does painting with acrylics - I used to paint mini's with enamels... way different.

I am starting up on the Talking Skull project again. I believe I have everything I need to finish it up, so it is next on the list.

TTFN,

Keith

 

News

<< <  Page 3 of 4  > >>

Jul 19, 2017
Category: General
Posted by: Keith

The gallery is fixed! I knew it had to be a simple thing... I had to upload the photos to a specific folder. I could not just point the gallery to the existing folders. Bit of a pain, but it is working. I have also added a 3d Printing projects page.

Jul 18, 2017
Category: General
Posted by: Keith

Got a lot further on the InMoov Head Project. Lots of pictures. Speaking of pictures, I got the Project Gallery fixed! I uploaded all of the photos you can see in the projects along with a few additional notes. As I add pictures, I will be sure to include them in the gallery.

That's all for now!


____________________________


Visitors:

hit counter
  View My Stats

____________________________

© Copyright 2004-2017 - CMS Made Simple
This site is powered by CMS Made Simple Design by: cmsmstemplates.pl
Admin login