Electronics. Robotics. Computers. DIY. Arduino. Raspberry Pi. RC. 3D Printing.

Whatever catches my fancy at the moment.


<<  <  Page 5 of 7  >  >>

Jul 22, 2017
Posted by: Keith

Just finished printing the last piece for my K2SO head project. Assembly should not take too long (actually, it took a lot longer than I thought - see the project page for more), but finishing will. There is about 20 hours of printing that went into this project. But I am not too happy with the fit of the top of the head. I am going to be reprinting the front, middle,  and back to see if I can get a better fit and hopefully less time required to finish it. I added some pictures to the K2SO gallery so you can see.

I also did some work figuring out how I was going to integrate the RCWL-0516 module into my Talking Skull Project and it is going to be really simple. You only need 3 pins - power, ground and and output. When it detects an living object, it outputs 3.3v on the output pin. And by default, it has a range of ~7 meters. I may have an issue with the 360 degree detection though. The next part of the project is figuring out the sound level module and getting that working with the Arduino moving the jaw. Which actually turned out quite simple. I did order a MP3 player that will be triggered by the detector module. Once that gets in I can move forward on this project.

I do have the camera to put into InMoov's eye. I am just trying to figure out how to route the USB cable from they eye and out the neck. I am pretty sure I am going to need to disassemble InMoov again...



Jul 19, 2017
Posted by: Keith

Got the gallery sorted out. It now works correctly. This new version (2.2.2) of CMS Made Simple has a few bugs I had to work around. The major ones, are taken care of, but for some reason the self linking is not working correctly, so I had to go back and fix all of the links to the internal web pages. Hopefully, the next release will fix it.

That really sucked. Now for the good stuff.

I have added the 3d Printer Project page. I also started another printing project, a half-scale K2SO head from Star Wars Rogue One. He is one of my favorite robots now... If you want to print your own, you can download it from here. MyMiniFactory is one of my favorite sites to find models.

I am just about ready to get the talking skull going soon.





Page 1 of 6  > >>

Dec 6, 2017
Category: General
Posted by: Keith

Lots of new stuff posted! 3 new galleries and project pages! 

Galleries: 28mm Bar Set, Props, 3d Printed Cribbage Board

Project pages: 28mm Bar Set, Props, 3d Printed Cribbage Board

Nov 29, 2017
Category: General
Posted by: Keith

Kind of an non update. Lots of stuff to talk about, but not much posted. There are two new galleries: 5th Set of DnD Characters and Call of Cthulhu Figures.



hit counter
  View My Stats


© Copyright 2007-present - A. K. Applegarth
This site is powered by CMS Made Simple Design by: cmsmstemplates.pl
Admin login